|
|
Design of steel-concrete composite structure of road box girder bridge on by-road of Bludov
Kuba, Michal ; Marván, David (referee) ; Nečesal, Petr (advisor)
The aim of this work is design and assessment of the box-girder road bridge on by-road of Bludov. Bridge is designed as composite steel concrete bridge with 5 spans with distances between supports of 31,25 m; 40,0 m; 60,0 m; 60,0 m and 40,35 m. Main bearing structure is designed as open steel box-girder with reinforced concrete deck. Box girder is braced with longitudinal and transversal bracings. Main structure is separated for each traffic direction. The bridge crosses river Morava and railway in 2nd and 3rd span, respectively. The category of road I/44 is S 21,5/100. The height of steel box girder is designed as 2,5 m. Bridge will be built by incremental launching method, with in-situ casted concrete deck afterwards. The bridge is designed according to current standards. Supporting elements are designed from steel of class S 355 and concrete of class C35/45.
|
|
|
Bridge on a local road
Nečasová, Pavla ; Zobek, Svatopluk (referee) ; Panáček, Josef (advisor)
Graduation thesis deal with the design and assessment of the load-bearing structure of the bridge with four fields. The bridge carries local road Žernov-Přerov over the motorway D1. Thesis include design of three alternative solutions. For detailed treatment was chosen variant of single point supported deskbeam. Graduation thesis include static calculation, general and detailed drawings and visualization.
|
|
|
Bridge over highway on a ramp
Tlamka, Tomáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The proposal is for new construction of a road bridge over the highway.Three options of solutions were proposed but only the option of connected girder slab beam of six fields was selected. This variant was assessed by static calculation. Static calculation is processed in accordance with European standards. Another important part of this thesis is also drawings, visualization, technical report and construction procedure.
|
|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Gym – Precast concrete frame construction
Čihák, Tomáš ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
This master thesis deals with a draft of precast concrete frame structure on the case of gymnasium building. The major part of this work are transversal and longitudinal frames, consisted of footings, columns, girders and precast floor slab. Other parts of the building are not solved. Thesis consists both static calculations and drawings.
|
|
|
Bridge over the Kyselá voda brook valley
Svoboda, Tomáš ; Řehulka, Martin (referee) ; Panáček, Josef (advisor)
The subject of the diploma thesis is the design of the ghrinder bridge over the Kyselá voda brook valley. The main topic is static calculation of supporting construction of six span structure. Two studies were executed and the second option, pre-stressed girder bridge was chosen. The lenght of the spans is 27 + 6 x 35 + 27 m. Static model and effect of loading are solved in software Scia Engineer. Reviews are calculated by hand according to current standards.
|
|
|
Prestressed bridge No. 209 over the expressway R2 in Slovakia
Mareček, Tomáš ; Formánek, Ing Martin (referee) ; Koláček, Jan (advisor)
This thesis deals with a design of the bridge for second class highway S7,5 through speedway R2 in Slovakia. From the three proposed versions the version with unicameral structure was chosen for further detailed analysis. The longitudinal direction of the structure is designed as continuous three fields. The lenght of the spans is 23,1 + 33,0 + 23,1 m. Detailed design of the selected version of the structure of prestressed concrete bridge is processed according to limiting conditions, including consideration of the impact of the progressive construction of the bridge. It is elaborated a detailed structural analysis including drawings and visualization.
|
|
|
Design and optimization of the arch structure
Herka, Martin ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
Diploma thesis deals with a design of concrete arch structure. There was made a preliminary design of concrete structure of a buried arch bridge. Subsequently was the shape of arch structure optimized to oblige the requirements of real buried arch bridge structure. There is included static calculation of the ecoduct construction. It is developed detailed drawings
|
|
| |
|
|
Reconstruction of the cement component storage structure
Bažantová, Lenka ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The thesis is focused on the design of the reconstruction of the reinforced concrete pre-stressed construction of the clinker reservoir. The supporting system of the structure consists of a reinforced concrete wall on which a prestressing reinforcement is applied in the sprayed concrete layer. Preliminary research revealed disturbances that could disrupt static objects. The aim of this work is to propose a solution for the reinforcement of the supporting structure. The thesis contains two variants of the reconstruction solution. A static report is prepared for the selected option, including the impact of the construction, the construction procedure and the drawing documentation.
|
guest ::
